Ochsner AIR FALCON 212, Руководство по эксплуатации

Страница: 68 / 88

68 www.ochsner.com | BA-982018-AIR FALCON-OTS-EN
Silent mode
Note
“Silent mode” can significantly reduce the output
of the heat pump, resulting in a loss of comfort. It
should therefore be used with caution.
30.1 Adjusting silent mode
»
Open the menu.
»
Select “Heat pump”.
»
Select “Operating program”.
»
Select “Operating program silent mode”.
»
Select “Time program”.
»
Return to the main screen.
»
Select the time program on the main screen.
1 Time program
»
Select the time program for “Silent mode” from the
drop-down menu.
1 Drop-down menu
2 Changeover point to „Silent“ (silent mode is active)
3 Changeover point to „Standard“ (silent mode is not
active)
4 „Silent“ (silent mode is active)
5 „Standard“ (silent mode is not active)
6 Save
Designation Description
Drop-down menu The time program for “Silent mode” can be
selected via the drop-down menu.
Changeover point to
“Silent” (silent mode is
active)
By default, “Silent mode” is inactive.
Press and hold to define new changeover
points and to delete old changeover points.
Changeover points can be moved by
pressing and sliding. The level of accuracy
of the setting can be changed by pressing
and sliding to the side.
Changeover point
to “Standard” (silent
mode is inactive)
“Silent” (silent mode is
active)
The “Silent mode” switching times can be
adjusted individually for each day.
The blue zone indicates that “Silent mode”
is switched on.
“Standard” (silent
mode is inactive)
The “Silent mode” switching times can be
adjusted individually for each day.
The red zone indicates that “Silent mode”
is switched off.
Save Before closing the time program, the
changes must be saved. All unsaved
changes will be lost when you close or
change to another time program.
»
Create and move the changeover points to adapt “Si-
lent mode” to your personal requirements.
»
Save the changes you make.