Ochsner AIR FALCON 212, Руководство по эксплуатации

Страница: 5 / 88

BA-982018-AIR FALCON-sh-EN | www.ochsner.com 5
Safety
1.1 Safety information
1.1.1 Arrangement of safety information
KEYWORD: Type of risk
The possible consequences of not observing the
safety information are shown here.
»
Instructions for action to remedy or remove
the source of danger are shown here.
1.1.2 Symbols and possible dangers
Symbol Type of risk
Injury
Electrocution
Burns
(burns, scalding)
Material damage
(appliance, consequential and environmental dam-
age)
1.1.3 Keywords
Keyword Meaning
DANGER Failure to observe this information will result in seri-
ous injury or death.
WARNING Failure to observe this information may result in se-
rious injury or death.
CAUTION Failure to observe this information may result in
non-serious or minor injury.
1.2 Other symbols
► This triangular symbol is used as a bullet point.
»
These two arrows represent the symbol for an in-
struction. This shows that there is something you
must do. The action you must take is described step
by step.
 
These symbols show you the level of a software
menu. In this example, 3 menu levels are
indicated.
Symbol Notes
Must not be disposed of with household waste
Low flammability
Symbol Notes
Additional documents are available and must be
used
1.3 Units of measurement
Note
In these documents, unless otherwise specified, all
lengths (e.g. in tables and illustrations) are given
in millimetres.
1.4 Specified performance figures
The performance figures of the appliance indicated in
these documents (text, tables and diagrams) have been
calculated according to standardised measurement con-
ditions. However, these measurement conditions often do
not completely correspond to the plant-specific conditions
applicable in the respective user‘s system. System-specific
factors that can affect the conditions include, for example,
the specific design of the system, the age of the system
and the actual flow rates. For this reason, the stated perfor-
mance figures can differ from plant-specific performance
data.
The stated performance figures can be confirmed only if
the measurements taken for the appliance are carried out
under the relevant standardised measurement conditions.
2. Safety
2.1 Intended use
The appliance is intended for use in a domestic environ-
ment. It can safely be used by persons who have received
no instruction.
Any use of the appliance that is different from or goes
beyond this is not regarded as intended use. Intended use
also includes observing this documentation and the doc-
umentation for design, installation and any accessories
used.
2.2 General safety information
Observe the following safety information and instructions
for the appliance.
► Only qualified contractors should carry out the elec -
trical work and installation of this appliance. Only
qualified contractors may open the appliance.
► Commissioning of the appliance may be carried out
only by OCHSNER Customer Service or by customer
service partners authorised by OCHSNER.