NSC Sicherheitstechnik GmbH
19/69
14.08.2013
Lange Wand 3
B01050 B01060 Operating Installation Manual Solution F1 20130814.doc
33719 Bielefeld
Version S040A13.08
Ion. Det. XP95
Ionisation smoke detect.
Heat det. XP95
Heat detector
H.Thermo. XP95
Heat detector high
temperatur
Multisen. XP95
Multisensor
MCP XP95
Manual Call Point
Sounderm. XP95
Sounder output module
Inp.mod. XP95
Input module
Zone mod. XP95
Conventional module
Inp/Outp. XP95
Input-/output module
Flame det. XP95
Flame detector
Beam XP95
Beam detector
Ref.Beam XP95
Beam detector with
reflector
opt. det. XPlorer
Optical smoke detector
Heat det. XPlorer
Heat detector
H.Thermo. XPlorer
Heat detector high
temperatur
Sounder S90
Sounder output module
IO S90
Input-/output module
Ion. S90
Ionisation smoke detect.
Zone S90
Conventional module
Opt. S90
Optical smoke detector
Thermo S90
Heat detector
MCP S90
Manual Call Point
Seg. : Segment = Section of addresses with a
maximum of 254 Hochiki detectors,
modules / base sounders and a maximum
of 126 Apollo detectors, modules. The
segments are partitioned on the loop card
according this list :
•
Loop card 1 : Segment 1 and 2
•
Loop card 2 : Segment 3 and 4
•
Loop card 3 : Segment 5 and 6
•
Loop card 4 : Segment 7 and 8
•
Loop card 5 : Segment 9 and 10
•
Loop card 6 : Segment 11 and 12
•
Loop card 7 : Segment 13 and 14
•
Loop card 8 : Segment 15 and 16
•
Loop card 9 : Segment 17 and 18
o
:
This is a symbol for a loop.
-
:
This is a symbol for a stub line.
Adr. : Detector address (physical address stored
in the detector)
Status : Current status of the detector (e.g. normal
condition, alarm condition, fault condition,
disabled condition)
By pressing F4 ("Details") it is possible to display
more details of the detectors. That means analogue
values, dust contamination, input bits and so on.
Jump to Picture
27
for Manual Call Points
Jump to Picture
28
for optical smoke detector
