NSC Sicherheitstechnik GmbH
36/69
14.08.2013
Lange Wand 3
B01050 B01060 Operating Installation Manual Solution F1 20130814.doc
33719 Bielefeld
Version S040A13.08
Please select a timer program by the cursor keys :
↑
,
↓
: Marker ">" one line up / one line down
and then press F4 ("Weekday")
Jump to Menu
112
.
66
Delay
Response time : 180 Sec.
Inspection time : 7 Min.
Timer program : 00
Cancel save
Delay times of Main alarm (TD)
These delay times – consisting of response time and
inspection time – relates to the Main alarm and so
usually to the transmission device (TD) of the fire
brigade station.
Way of operation :
If a smoke detector detects an alarm and the panel is
in day mode – delay is activated – the response time
will be started immediately. Now the end user has the
obligation to acknowledge the alarm condition by
pressing "internal buzzer off"
Otherwise if that is not done, the main alarm is
indicated and the fire brigade will be called.
If the button is pressed the inspection time will be
started and the user has several minutes to inspect
the alarm. At the end of the inspection time the main
alarm is indicated and the fire brigade will be called.
He can avoid that by resetting the FCP.
If the user presses a MCP during one of the above
described periods a main alarm will be activated
immediately.
The response time can be 0 – 180 Sec.
The inspection time can be 1 – 7 Min.
Please confirm every line by OK and press F4
("save") to save the new delay times.
Pay attention :
The delay can be linked to a timer program. This
offers the possibility to configure the day and night
mode individually for every weekday and – if
necessary – to switch between day and night mode
up to 4 times per day.
So that means one of the timer programs should be
reserved for this function if the user needs the day
and night modes (Menu
65
"Timer programs").
If the user doesn’t need an automatic switching from
day to night mode and vice versa you can switch it
manually too. Therefore please have a look in "Main
Menu"
"1. Switch on/off"
"7. Delay"
67
Date/Time
Day : 09 Friday
Month : 07 Winter
Year : 04
Hour : 07
Minute : 46
Second : 39
Cancel Maintenanc save
To set date and time
Please type the right data line by line and confirm
every line by OK
Weekday for timer programs will be calculated
automatically.
It is not necessary to configure summer or winter
time because the panel does this automatically. This
means at the last weekend in March and October the
panel switches to summer or winter time.
This can be deactivated if you go to "System
settings" (Menu
69
)
item 7.
By pressing F3 ("Maintenance") a Maintenance
interval can be configured. When this interval
