NSC Sicherheitstechnik Solution F1, Руководство по эксплуатации и установке

Страница: 33 / 69

NSC Sicherheitstechnik GmbH
33/69 14.08.2013
Lange Wand 3 B01050 B01060 Operating Installation Manual Solution F1 20130814.doc
33719 Bielefeld Version S040A13.08
Example of loop 1, module addr. 99 :
Output module
Segment : 1
Address : 99
Output : 1
Cancel Module Sounder Event
See example of LCD display on left side.
Press F2 ("Module") or F3 ("Sounder")
Jump to
Menu 107
(Menu 107 to assign on/off functions to the output
modules or to configure tones / volume for base
sounders.)
Press F4 ("Event")
Jump to Menu 106
(Menu 106 to configure cause and effects events
when the output module has to activate)
58
Input module
Seg. :
Address :
Input :
Cancel Event
Automatic Control: Input modules (loop)
This configuration menu relates to the input modules
on the loops.
You can use input modules to :
disable detectors / zones
change the sensitivity of addressable
detectors (Day mode/Night mode)
activate outputs, relays and power outputs
switch off the internal buzzer
etc.
Please type the loop number ("Seg.”) and the output
module’s address as well as the input number and
confirm every line by "OK”.
Press F4 ("Event")
Jump to Menu 106
59
Autom.controlling Status
Input : 001 Normal
↓
+1
↑
-1 Selection ->+10 <--10
>001 Input 001 Main board
002 Input 002 Main board
003 Input 003 Main board
Cancel Enter
Automatic Control: 8 resistor monitored
Inputs
This configuration menu relates to the 8 monitored
inputs on main board.
Please select the input which shall be configured by
the cursor keys :
↑
,
↓
: Marker ">" one line up / one line down
<-, -> : Marker ">" 10 lines up / 10 lines down
or type the number of the input directly by using the
keypad and confirm this by "OK”.
After selecting the input the last line of the LC module
changes and you can choose :
Press F2 ("Settings")
Jump to Menu 108
(Menu 108 to configure monitoring and delay of OC
inputs) or
Press F3 ("Function")
Jump to Menu 105
(selection of standard function for this input) or
Press F4 ("Event")
Jump to Menu 106
(Menu 106 to configure cause and effects events
when the output module has to activate)