manualshive.com logo in svg

NEC UNIVERGE NEAX 2000 IPS, Руководство по установке

Поделиться
Скачать
NEC UNIVERGE NEAX 2000 IPS Скачать руководство пользователя страница 303

– 287 –

NWA-008841-001 Rev.5.0

90ch2002.fm

CHAPTER 2 INSTALLATION

MP System Changeover

• Automatic Changeover

By detecting the emergency notice (EMA), the system executes the changeover from the MP0 to the
MP1 or from the MP1 to the MP0 automatically.

• Manual Changeover

There are two ways for manual changeover as follows.

Case1

By MB Switch Setting:
Flip the MB switch on the MP0 card to ON (UP position).
- Now changeover is executed.

When you want the stand by MP card to return to the active MP, flip the MB switch on
the stand by MP card to OFF (DOWN position), then flip the MB switch on the active
MP card to ON (UP position).

Case2

By System Data Setting:
Assign the following data for changeover.

CME0 Y=6>3600: MM DD HH mm

MM: Month (01-12)
DD : Date (01-31)
HH : Hour (00-23)
mm : Minute (00-59)

NOTE:

After setting the first data, the MAT indicates “INITIAL?_”.
Then input the present time. Now changeover is executed.
When there is no MP card for stand by, or the MB switch on the MP card in stand by is ON (UP
position), the MAT indicates “HARDWARE ERROR”.

BACKUP CPU SYSTEM

Содержание UNIVERGE NEAX 2000 IPS












































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды