Motor Power Company DUET_FL 48/10, Руководство пользователя

Страница: 144 / 196

Page 144
Example:
You have a drive with 20 mm per revolution, without a gearbox. You would like to enter the
acceleration in (mm/minute)/s. Enter 20 into the
Feed constant field and 60 into the Time
base speed field. (1 minute x 1s = 60 x 1 s² = 60 s²)
Decimal places
Another way of configuring the display units is the configuration of decimal places. You can enter the
number of decimal places for the position, speed and acceleration unit (from 0 to 5) on the
Decimal
places tab in the menu Options/Display units .
Direct input of distance, speed and acceleration units.
On the Direct input tab, you can directly enter values for the factor groups Position , Speed and
Acceleration , if you have previously selected the Direct input option in the Display mode field on the
Display units tab.
Caution! For experienced users only!
The direct input of physical units allows drastic changes of the controller parameters of
the DUET_FL servo positioning controller.
You can also select from the following units for the display of the parameterization program:
 Increments
 Degree
 Radian
 Revolutions
User Manual DUET_FL „DUET_FL 48/10“ Version 1.1 Motor Power Company