Motor Power Company DUET_FL 48/10, Руководство пользователя

Страница: 30 / 196

Page 30
may not be relied on exclusively. Until the built-in monitors come into effect, faulty drive movements
must be taken into account; their magnitude depends on the type of control and on the operating state.
DANGER!
Dangerous movements!
Danger to life, risk of injury, serious personal injuries or property damage!
For the reasons mentioned above, personal protection must be ensured by means of monitoring or
superordinated measures on the device. These are installed in accordance with the specific data of the
system and a danger and error analysis by the manufacturer. The safety regulations applying to the
system are also taken into consideration. Random movements or other malfunctions may be caused
by switching the safety installations off, by bypassing them or by not activating them.
Protection against contact with hot parts
DANGER!
Housing surfaces may be hot!
Risk of injury! Risk of burning!
Do not touch housing surfaces in the vicinity of heat sources! Danger of burning!
Before accessing devices let them cool down for 10 minutes after switching them off.
Touching hot parts of the equipment such as the housing, which contain heat sinks and
resistors, may cause burns!
2.1.2 Protection during handling and assembly
Handling and assembly of certain parts and components in an unsuitable manner may under adverse
conditions cause injuries.
DANGER!
Risk of injury due to improper handling!
Personal injury due to pinching, shearing, cutting, crushing!
The following general safety notes apply:
Comply with the general setup and safety regulations on handling and assembly.
User Manual DUET_FL „DUET_FL 48/10“ Version 1.1 Motor Power Company