Motor Power Company DUET_FL 48/10, Руководство пользователя

Страница: 155 / 196

Page 155
Table 26: Online/Offline activation
Online parameterization active
Offline parameterization active
The active mode is highlighted in green.
The parameterization program allows access to parameter sets even if no serial communication with
the DUET_FL servo positioning controller has been established. This, however, requires the presence
of a corresponding *.DCO file (see
chapter Loading and saving parameter sets ).
It is possible to
 read controller parameters from a *.DCO file
 change controller parameters
 save modified values in the same or in another *.DCO file
 print parameter sets (see also chapter Printing parameter sets ).
In order to let the changes made become effective, the modified parameter set has to be loaded into
the DUET_FL servo positioning controller (see
chapter Loading and saving parameter sets ).
The illustration below shows the principle of the offline parameterization:
PC
*.DCO-file
DIS-2 ServoCommander
Figure 29: Offline parameterization
To activate the offline parameterization, click on the menu item Options/Communication/Offline-
parameterisation or on the offline icon in the tool bar.
You will be asked which *.DCO file to open. Select a corresponding file.
DANGER !
If you use a DCO file for a different type of device, make sure to check the configurations
for rated current, maximum current, angle encoder offset, phase sequence, number of
poles, current controller and speed controller, to prevent damages to the servo positioning
controller/motor!
During the offline parameterization, the parameterization program shows a behaviour which may
deviate from the online parameterization:
 Certain menus (e.g. firmware download) are inaccessible.
 The menu File/Parameter set has different submenus:
 Open file
User Manual DUET_FL „DUET_FL 48/10“ Version 1.1 Motor Power Company