Motor Power Company DUET_FL 48/10, Руководство пользователя

Страница: 117 / 196

Page 117
Directories
The installed version of the parametrization program has the following sub-directories:
Table 18: Directories
Directory Content
FIRMWARE Firmware versions
TXT Default directory for plain text output of parameter data
DCO Default directory for the parameter files
6.2.3 Communication via communication objects
The parametrization program accesses the DUET_FL servo positioning controller by means of so-
called communication objects via a standardized, internal software interface. During the processing of
the communication tasks, an internal check for the following errors will be performed:

Write access to read-only communication objects
 Read access to write-only communication objects

Overshooting or undershooting of the values range
 Erroneous data transfer
The first two cases are fatal errors, which normally should not occur in practice. In the last case, the
parameterization program repeatedly tries to perform the read or write process without a bit error.
Overshooting and undershooting of the value range of a communication object are indicated by a
warning. If there is an internal value for this object, the value will be saved as a desired value.
However, the original value will be maintained internally. Otherwise the value will be rejected.
User Manual DUET_FL „DUET_FL 48/10“ Version 1.1 Motor Power Company