Motor Power Company DUET_FL 48/10, Руководство пользователя

Страница: 112 / 196

Page 112
Error display in DUET_FL ServoCommander TM
The error window is a permanent window in the parameterization program. If there is no error, the
window is minimized.
In the event of a controller error, the user interface changes in two ways:
1. The error window will be maximized and put to the surface.
2. The error will be stated in red writing on the lower bar of the main window.
Errors are handled in three steps:
1. Error analysis: In the example given here, the error is caused by a broken/unconnected
connection to the angle encoder.
2. Error elimination: Eliminate the cause of the error. (In this example, the correct connection
to the angle encoder has to be provided.)
3. Error acknowledgement: Click on the Clear button in the error window. If the error was
successfully eliminated, the window will be minimized. If the error still exists, it will be
maximized again.
You can minimize the window by clicking the Cancel button. Any existing error message will remain in
the error window on the status bar.
The Cancel button does not eliminate any error!
User Manual DUET_FL „DUET_FL 48/10“ Version 1.1 Motor Power Company