5
25. Remove the cap (1) and the bolt (2) that secures the
seat belt (3) to the top of the B-pillar (4) and position
the seat belt out of the way.
26. Using a trim stick C-4755 or equivalent, disengage the
retaining tabs that secure the upper B-pillar trim panel
(5) to the B-pillar and remove the trim panel.
27. Remove the cap (1) and then the bolt (2) that secures
the seat belt (3) to the top of the C-pillar (4) and
position the seat belt out of the way.
28. Using a trim stick C-4755 or equivalent, disengage the
retaining tabs that secure the upper C-pillar trim panel
(5) to the C-pillar and remove the trim panel.
29. Remove the bolt (3) that secures the seat belt (2) to
the bottom of the C-pillar (4) and position the seat belt
out of the way.
30. Using a trim stick C-4755 or equivalent, disengage the
retaining tabs that secure the lower C-pillar trim panel
(1) to the C-pillar.
31. Remove the seat belt from the lower C-pillar trim panel
through the slot provided and remove the trim panel.
32. Using a trim stick C-4755 or equivalent, disengage the
retaining tabs of the sill trim panel (1) from the retainer
clips in the rear door sill (2) and remove the trim panel.
ALL
33. Using a trim stick C-4755 or equivalent, disengage the
release clip (2) as shown and remove the coat hook (1) from
the headliner (3)
NOTE: There are two types of single lamp dome lamps available in this vehicle: one with a switch that is activated
by depressing the lamp lens, and one without a switch. The bulb types and service procedures are identical for
both of these lamps.
4/1/2008
K6860274 Rev. 1
