4
16. Using a magnetic screwdriver or equivalent, remove the upper
screw and pull the upper part of the trim panel (1) away from
the pillar and release the bottom tabs (2).
17. Position aside the c-pillar trim, both sides.
18. Pull the grab handle downward, remove the two screws that
secure the grab handle to the roof panel, and remove the grab
handles from the headliner.
19. If equipped, disconnect the reading lamp wire connector from
the grab handles, both sides.
20. Partially separate the door seals from the door opening, both
sides.
21. Remove the screws and the cargo net d-ring that secure the
quarter trim panel to the quarter panel.
22. Using a trim stick C-4755 or equivalent, disengage the
retaining tabs that secure the quarter trim panel to the quarter
panel.
23. Pull the quarter trim panel away from the quarter panel (3).
24. If equipped, disconnect the rear heater control connectors (1).
25. Remove the quarter trim panel.
26. Separate the glove box damper rod (1) from the clove box by
sliding the rod towards the rear of the vehicle to release it from
the bin.
27. Open the glove box and carefully use fingers to press down
glove box open stops at the top of the bin, downward to allow
the glove box to rotate toward the carpet.
28. Rotate the box down and release the door hinges (2) at the
bottom and remove the glove box.
4/1/2008
K6860274 Rev. 1
