9
46. Connect the antenna harness to the antenna.
47. Position the quarter trim panel in the vehicle.
48. If equipped, connect the wire harness connector to the power
outlet.
49. Position the
fl
ange on the quarter trim panel into the seal ditch
and secure the bottom clip
fi
rst and then the middle clip.
50. Align the two fastener holes in the quarter trim panel with
the two fastener holes in the quarter panel and engage the
retaining tabs that secure the quarter trim panel to the quarter
panel.
51. Install the two screws and the d-ring that secure the quarter
trim panel to the quarter panel.
52. Position the load
fl
oor in the vehicle.
53. Install the two nuts that secure the load
fl
oor to the
fl
oor panel.
4/1/2008
K6860274 Rev. 1