7
31. Center the template on the rear of the roof, aligning the
template with the roof edge.
32. Center punch the two holes marked on the template.
33. Remove the template.
CAUTION: Do not drill more than a 6 mm (1/4 in.), failure to do so will result in damage to the vehicles headliner.
34. Drill a 3 mm (1/8 in.) pilot hole at each of the center punched locations.
35. Drill the rear hole to 5 mm (13/16 in.).
36. Drill the front hole to 19 mm (3/4 in.).
37. Debur both of the holes.
38. Apply Mopar® Corrosion Inhibitor, p/n 820300508, to the bare metal surface of the drilled holes.
39. Install the satellite antenna. Tighten to 9 N m (80 in. lbs.).
NOTE: The antenna ports are keyed and color coded for there
speci c antenna connection.
NOTE: All SDARS antenna connections are Yellow.
40. Connect the antenna harness to the antenna.
41. Position radio to instrument panel, and install mounting
fasteners.
42. Install instrument panel center bezel.
4/1/2008
K6860274 Rev. 1
