4
13. Using a trim stick C-4755 or equivalent, disengage the
retaining tabs (2) that secure the rear door sill scuff plate (1)
to the retaining clips in the rear door sill and remove the scuff
plate.
Club Cab, Without Rear Jumper Seats
14. Adjust the front seat to its most forward position.
CAUTION: Keep the inner bottom end of the upper C-pillar trim
panel away from the cab back trim panel when removing the
upper C-pillar trim panel to prevent scratching the back trim
panel.
15. Using a trim stick C-4755 or equivalent, disengage the
retaining tabs (3) that secure the upper C-pillar trim panel
(2) to the C-pillar. Pull the outer bottom end of the trim panel
outward toward the door opening so that the inner bottom
end of the trim panel doesn't touch the cab back trim panel.
While maintaining the outward pressure, pull the trim panel
away from the C-pillar and remove the trim panel.
Using a trim stick C-4755 or equivalent, disengage the retaining
tabs that secure the lower C-pillar trim panel (4) to the C-pillar and
remove the trim panel.
16. Pull the top of each door seal downward slightly.
17. Remove the upper door striker trim covers (3) as follows:
• Using a trim stick or another suitable wide
fl
at-bladed tool,
gently pry the edges of the upper door striker trim cover (3)
away from the headliner (2) far enough to disengage the
two snap clips that secure the cover to the upper roof rail
(1).
4/1/2008
K6860274 Rev. 1
