13
89. Slide the upper retaining tab of the upper C-pillar trim panel
(2) into the hole in the C-pillar and engage the retaining tabs
that secure the trim panel to the C-pillar.
90. Position the seat belt turning loop (3) to the mounting hole
in the upper C-pillar trim panel and install the screw (5) that
secures the seat belt turning loop to the C-pillar. Tighten the
screw to 39 N·m (29 ft. lbs.).
91. Engage the upper edge of the trim cover (4) over the top of
the turning loop. Then, squeeze the lower end of the trim
cover and the turning loop together
fi
rmly and evenly until the
engagement tabs of the trim cover snap into the slots of the
turning loop.
92. Align the retaining tabs (2) on the rear door sill scuff plate (1)
with the retaining clips in the rear door sill and engage the
retaining tabs that secure the scuff plate to the door sill.
All Cabs
93. Position the glove box and twist the box tabs (2) onto the
hinges (1) using a twisting motion as indicated.
4/1/2008
K6860274 Rev. 1
