1
SDARS ANTENNA
DURANGO/ASPEN
PROCEDURE STEPS:
1. Disconnect and isolate the negative battery cable.
2. Using a trim stick C-4755 or equivalent, remove the upper rear
headliner trim (3).
3. Remove the headliner center push pin to lower the rear of the
headliner.
4. Remove the driver side D-pillar trim (2).
5. Remove the screw (1).
6. Using a trim stick C-4755 or equivalent, separate the trim (2)
and retaining clips and anchor (3).
7. Remove the rear storage compartment if equipped to access
the liftgate scuff pad screws (1). Using a trim stick C-4755 or
equivalent, remove the liftgate scuff pad (2)
4/1/2008
K6860274 Rev. 1
