7
58. Position the upper D-pillar trim into the liftgate opening.
59. Connect the power liftgate D-Pillar switch and third row power
folding seat switch electrical connectors (3) (if equipped).
60. Carefully engage the upper D-pillar trim end tab (5) into the
rear header trim plate.
61. Push the upper D-pillar trim onto the D-Pillar to engage the
trim retaining clips (2).
62. Feed the third seat center seat belt webbing through the
header trim.
63. Align the retainers over the retaining slots and
fi
rm snap into
place.
64. Position the liftgate scuff plate (3) into the liftgate
opening.
65. Carefully engage the scuff plate end tabs (4) into the
left and right quarter trim panels (5).
66. Push the liftgate scuff plate down onto the liftgate
opening to engage the scuff plate retaining clips (1).
4/1/2008
K6860274 Rev. 1
