10
54. Position the liftgate scuff plate to the liftgate door sill and
engage the retaining tabs that secure the scuff plate to the
door sill.
55. Position the locating tabs on the bottom of the D-pillar trim
panel into the slots in the top of the quarter trim panel.
56. Align the retaining tabs on the D-pillar trim panel with the
retaining clips in the D-pillar and engage the retaining tabs
that secure the trim panel to the D-pillar.
57. Install the push pins to the headliner at the rear of the vehicle.
58. Align the retaining tabs on the upper liftgate trim panel with the
retaining clips in the liftgate opening and engage the retaining
tabs that secure the trim panel to the liftgate opening.
59. If equipped, connect the reading lamp wire connector from the
grab handles.
60. Install the grab handle to the roof panel.
4/1/2008
K6860274 Rev. 1
