16
VALIDATION PROCESS
from the "Initial Start up" screen on the ScanTool follow the steps below:
• Using a ScanTool follow the menu to
ECU VIEW
, select either
TPIMCGW CENTRAL GATEWAY
or
FCMCGW
CENTRAL GATEWAY
depending on the vehicle.
• Select
MORE OPTIONS, ECU DETAILS,
and then
CONFIG INFO
.
• Verify
SDARV - - - - SET
is present.
• Drive the vehicle outside for a clear satellite signal to the antenna and verify system operation.
4/1/2008
K6860274 Rev. 1