background image

Installation Guide for Antennas 
CMAX-DM20/DM30/DM60-CPUSEi 

 

 

 

 

 

Page 1 

 

Installation Guide for  

CMAX-DM20/DM30/ DM60-CPUSEi Antenna 

 
 

 Note:  Please  read  the  complete  description  before  starting  the  installation!  Be 

sure  that  connectors  are  properly  sealed  from  water  if  no  cables  are 
connected to them after installation. 

 
  
 
 
 
 

1.  ASSEMBLY  

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Fit 3 parts together and fix with screws M8 x 16, washers and spring washers    
(M8 torque: 27 Nm) 

Tools required:  
Wrench, width: 13 mm 

Washer 

Spring washer 

Screw 

Содержание CMAX-DM20

Страница 1: ... read the complete description before starting the installation Be sure that connectors are properly sealed from water if no cables are connected to them after installation 1 ASSEMBLY Fit 3 parts together and fix with screws M8 x 16 washers and spring washers M8 torque 27 Nm Tools required Wrench width 13 mm Washer Spring washer Screw ...

Страница 2: ...shown in the drawing above 2 Drill 4 holes into the wall and insert appropriate dowels into holes 3 Attach the antenna pedestal 3 POLE MOUNTING 1 Lay proper lashing straps around pole and lead them through mounting bracket 2 Adjust bracket in antenna direction and fasten bracket Lashing Straps Antenna Pedastal Pole ...

Страница 3: ...NG Depending on space available and adjusting angel the DM 20DM30 antenna can be mounted onto the pedestal in 3 alternatives see circle marks in picture to the left hand side 4 3 AZIMUTH ANGLE 1 Loosen the 3 fixing screws do NOT unscrew it completely 2 Adjust your desired angle The complete antenna pedestal can be swiveled to the left right hand side by up to 55 3 Tighten the fixing screw Spring W...

Страница 4: ...om Visit our Web site or contact your local Andrew Wireless Solutions representative for more information 2014 CommScope Inc All rights reserved Andrew Wireless Solutions is a trademark of CommScope All trademarks identified by or are registered trademarks or trademarks respectively of CommScope This document is for planning purposes only and is not intended to modify or supplement any specificati...

Отзывы: