Moore 535 PROFILER, Руководство пользователя

Страница: 60 / 151

535-PROF User's Manual Chapter 5
51
Controller Set Up
Access Set Up Return to Operation Next menu Next parameter Next value Access Tuning Return to Operation
+
FAST MENU
DISPLAY
+
FAST MENU MENU
▲ ▼
MENU
DISPLAY
D 1000
4. RSP: LOW
Defines the lowest setpoint value to be accepted from the remote setpoint source.
R –9999 to 99999.
D Dependent on RSP:LO.RNG. value.
5. RSP: HIGH
Defines the highest setpoint value from a remote setpoint source.
R –9999 to 99999
D Dependent on RSP:HI.RNG. value
6. TRACKING
Defines whether the local setpoints 1 to 8 will track the remote setpoint.
D NO
• YES
7. BIAS LOW
Defines the lowest bias value that may be entered.
R –9999 to 99999. Maximum value is BIAS HIGH.
D –1000
8. BIAS HIGH
Defines the highest bias value that may be entered.
R –9999 to 99999. Minimum value is BIAS LOW.
D 1000
9. RSP FIXED
Defines what happens if remote setpoint is lost while it is active and then is
restored.
• REMOTE SP Returns to remote setpoint when it is restored
D LOCAL Local setpoint remains active when RSP is
restored
RETRANS.
1. TYPE:2
Defines what is to be retransmitted for output 2
D PV This refers to the linearized process variable
• SETPOINT This is the target setpoint
• RAMP SP This is the ramping, or actual setpoint, when the
setpoint is ramping
• CTRL. OUT This is the control output value
2. LOW RANGE:2
Defines the low end of the range for output 2 in engineering units. Does not appear for
RSP:LOW
(D)
RSP:HIGH
(D)
TRACKING
NO
BIAS LOW
-1000
BIAS HIGH
1000
LO RANGE:2
(D)
RSP: FIXED
LOCAL
RETRANS.
TYPE:2
PV