Operation
535 User's Manual
Chapter 2, Controller Operation
7
BASIC PROFILE CONTROLLER OPERATING
PROCEDURES
Use the following as a quick guide to key operating functions of the 535-PROF.
To Enter the RECIPE SET UP Mode
1. To enter the
RECIPE
SET UP mode from any other mode, hold down
FAST
and press
MENU
. The
MENU
key will illuminate. The 2nd display line will
indicate RECIPE #, where # represents the recipe number.
2. Use the or key to select the recipe number.
3. Press
MENU
by itself. The first parameter of this menu for this recipe will
appear in the 2nd display, replacing RECIPE # , while the choices or selec-
tions appear in the 3rd display.
4. Pressing
DISPLAY
at any time exits the
RECIPE
SET UP mode and re-
turns you to
OPERATION
mode.
To Enter the SET UP Mode
1. If you are not in
MANUAL
control, press
MANUAL
. The
MANUAL
key will
illuminate.
2. Hold down
FAST
and press
MENU
. The
MENU
key will illuminate.
RECIPE # will appear alone in the 2nd display. Entering the
SET UP
mode
first gives you access to the
RECIPE
SET UP mode.
3. Hold down
FAST
and press
MENU
. CONFIG appears alone in the 2nd dis-
play. You are now in the
SET UP
mode. See Chapter 5 for a list of all Set Up
parameters, and Chapter 7 for applications.
To run a recipe:
1. Pressing the
RUN
key prompts the choice of recipe number.
2. Use the or key to select the proper recipe.
3. Press the
ACK
key to start the recipe.
To hold a recipe:
1. While a recipe is running (indicated when the
RUN
key is lit red), briefly press
the
RUN
key. The key will blink on and off and the 3rd display will indicate
HOLDING.
2. Press the
RUN
key again to resume the recipe.
To abort a recipe and place the controller in MANUAL
mode:
1. While a recipe is running (indicated when the
RUN
key is lit red), press the
MANUAL key. The 2nd display line will show REC. ABORT and the 3rd dis-
play will show PRESS
ACK
.
2. Press the
ACK
key within 5 seconds to abort the recipe and place the con-
troller in MANUAL mode. The manual output value will be the last output at
the point the recipe was aborted. The raise and lower keys may be used to
modify the output.
To abort a recipe and control to the IDLE setpoint:
1. While a recipe is running (indicated when the
RUN
key is lit red), press the
RUN
key and hold until the 2nd display line shows REC. ABORT and the 3rd
display will show PRESS ACK.
2. Press the
ACK
key within 5 seconds to abort the recipe and the controller
