535-PROF User's Manual
Chapter 5
65
Controller Set Up
CONTROL
Parameter
Description
Values
1. ALGORITHM
Control algorithm Type
2. D. SOURCE
Derivative action variable
3. ACTION:1
First control output action
4. PV BREAK
Manual output level upon PV input loss
5. LOW OUT.
Lowest output value in automatic control
6. HIGH OUT.
Highest output value in automatic control
7. ACTION:2
Second control output action
8. P.P. TYPE
Position proportioning algorithm
9. CCW TIME
Counter clockwise motor stroke time
10. CW TIME
Clockwise motor stroke time
11. MIN. TIME
Motor “on” time (minimum value)
12. S/W RANGE
Full range resistance of the slidewire
13. OPEN F/B
Feedback ohm value for full open
14. CLOSE F/B
Feedback ohm value for full close
15. OUT1 STOP
Control output 1 stop point for staging outputs
16. OUT2 STRT.
Control output 2 start point for staging outputs
