Moore 535 PROFILER, Руководство пользователя

Страница: 114 / 151

535-PROF User's Manual Chapter 7
105
Applications
B A C
➔
➔ NOISE BUMP
➔
ADAPTIVE
SP
• A to B is a 5 second noise band measurement.
• B to C is an open loop bump test to determine initial PID values
and response time.
• C is Pretune completed, so Adaptive PID control begins if ENABLED.
➔
TIME
TIME
B A
0%
30%
50%
0%
70%
100%
300
500
700
900
➔ ➔
SP
CONTROL
OUTPUT
PV
• A to B is ON/OFF control to determine initial PID values.
• B is Pretune completed, so Adaptive PID control beings if ENABLED.
Note: Noise Band and Resp. Time must be entered before
enabling Adaptive TUne)
TYPE 1 Pretune/Adaptive Control
Out Step
Out Step
B A C
➔
➔ NOISE BUMP
➔
ADAPTIVE
SP
• A to B is a 5 second noise band measurement.
• B to C is an impulse to determine initial PID values and response
time.
• C is Pretune completed, so Adaptive PID control begins if ENABLED.
➔
High Out Limit
Low Out Limit
PRETUNE ADAPTIVE
Pretune
TIME
Pretune
0
0%
30%
50%
0%
70%
100%
300
500
700
900
CONTROL
OUTPUT
PV
TYPE 2 Pretune/Adaptive Control
0
0%
30%
50%
0%
70%
100%
300
500
700
900
CONTROL
OUTPUT
PV
TYPE 3 Pretune/Adaptive Control
0
under manual control.
8. Press MENU to access the TUNING menu.
Set ADAPTIVE to ENABLED. The Adaptive Tuning cycle does not begin
until the controller is under automatic control.
9. Activate the next parameter, PRETUNE .
10. Press and then ACK to begin Pretuning.
The 3rd display will show the message EXECUTING.
Figure 7.13
Pretune TYPE 1, TYPE 2 and TYPE 3
with Adaptive Tune