Introduction
2
Chapter 1
535-PROF User’s Manual
SET UP
, also referred to as configuration. Here the basic functions of the instru-
ment are configured, such as input and output assignments, alarm types and
special functions.
TUNING
, where control function parameters for Proportional, Integral and Deri-
vation (PID) are configured. Use this mode periodically to optimize the control
performance of the instrument.
RECIPE SET UP
, where the ramps, dwells and events for each recipe are con-
figured.
ORDER CODE, PACKAGING INFORMATION
Compare the product number to the ordering code on page 3 to determine the
outputs and options installed on the controller. The product number is printed on
the label on the top of the controller case.
Included with this 535 Profile Controller are:
•
a 535 Profile Controller User’s Manual
•
mounting hardware
•
1 sheet of Engineering unit adhesive labels
WHERE TO GO NEXT
•
To become familiar with the controller interface, continue to Chapter 2.
•
For important hardware installation guidelines, see Chapters 3 and 4.
•
For a detailed description of all the software menus and parameters,
follow through Chapters 5 and 6. Appendix 1 can be used as a basic guide-
line to these parameters.
TEXT FORMATTING IN THIS MANUAL
Feature
Format
KEYS
RUN
DISPLAY
or
ICONS
OUT, ALM
MENUS
CONFIG., TUNING,
PARAMETERS
CYCLE TM:1, MIN.OUT2
PARAMETER VALUES
OFF, SETPOINT, LAST OUT.
DISPLAY MESSAGES
TOO HOT, OUT%
RUN
DISPLAY
