Operation
6
Chapter 2, Controller Operation
535 User's Manual
DISPLAY
Press to toggle through values in the 2nd display for setpoint, ramping setpoint
(if available), deviation, PV1 (If PV source is not PV1), PV2 (if PV Source is not
PV1), output and valve position (if available).
In
RECIPE SET UP, TUNING, SET UP
mode, press to return controller to
OPERATION
mode (display will show current setpoint).
FAST+DISPLAY
When a recipe is running or held, press to select recipe status.
When no recipe is running or held, press to display EVENT 000 message.
Press to increase the value or selection of displayed parameter.
FAST+
Press to scroll through values at a faster rate.
Press to decrease the value or selection of displayed parameter.
FAST+
Press to scroll through values at a faster rate.
ACK
Press to acknowledge (an) alarm(s).
Press to acknowledge Run, Abort and next segment commands.
When lit, indicates there is an acknowledgeable alarm or an event is being held
at the end of a recipe.
FAST+ACK
For events held at the end of a recipe, press to acknowledge and disable the
events.
MENU
In
OPERATION
mode, press to access the
TUNING
mode/menu.
In
RECIPE SET UP, SET UP
or
TUNING
mode, press to advance through a
menu’s parameters. (Use
FAST+MENU
to advance to to the next menu.)
FAST+MENU
In Automatic control, press to enter
RECIPE SET UP
mode. In Manual control,
press to enter the
SET UP
mode.
In
SET UP
mode, press to advance through menus. (Use
MENU
by itself to
access the parameters of a particular menu.)
DISPLAY
ACK
FAST
FAST
MENU
FAST
+
DISPLAY
FAST
+
ACK
MENU
FAST
+
+
+
