Molecular Devices FLIPR Tetra, Руководство пользователя

Страница: 110 / 302

ScreenWorks Software Overview
110 0112-0109 H
Aspirate Check the check box at the start of a row to activate an
aspirate sequence.
If Multiple Aspirate has been selected as Fluid Transfer
Type , enter an aspirate volume less than the dispense
volume to add another aspirate step.
Note: Only checked aspirate sequences are active in
the experimental protocol.
Edit Aspirate Configure an aspirate step in the table by selecting it and
pressing the Edit Aspirate button, or double-click on the
row. This opens the Edit Aspirate dialog.
Use this dialog to define aspiration parameters reported in
the table.
Source Plate —Select the plate from which you want an
aliquot of fluid removed. Typically, this is a plate containing
an agonist, antagonist or if the Cell Suspension option is
installed, cells in suspension.
Quadrant —Select quadrant from which volume is aspirated.
Note: Quadrant selection is only available when
liquid is aspirated from a plate using a pipettor head
of lower density, for example, 384-well plate using a
96 pipettor head.
Volume— Enter volume (in μ L) to aspirate.
Speed— Enter speed at which to aspirate (in μ L/s).
Fill Reservoir Speed
1
— Select the speed with which fill the
Cell Reservoir from the spinner flask.
Item Description