Mitsubishi MOTORS OUTLANDER PHEV 2021, Руководство пользователя

Страница: 345 / 403

Tyre repair kit
9-10 For emergencies
9
9. If the tyre sealant bottle (H) has the cap
(G), remove it. Do not remove the seal (I).
Screw the filler hose (J) onto the bottle
(H). As you screw the filler hose onto the
bottle, the seal will break, allowing the
sealant to be used.
10. Press the hose onto the valve (D). Holding
the sealant bottle upside-down, squeeze it
again and again to inject all of the sealant
into the tyre.
11. After injecting the sealant, pull the hose
off the valve, remove any residual sealant
from the valve, rim and/or tyre. Fit the
valve insert (F) into the valve (D), and
screw the valve insert securely into place
using the valve remover (E).
CAUTION
 If you shake the bottle after screwing on the
hose, sealant may spray out of the hose.
NOTE
 When injecting the sealant, position the
valve away from the bottom, i.e., away from
the point where the tyre touches the ground.
If the valve is near the point where the tyre
touches the ground, the sealant may not go
into the tyre easily.
NOTE
 When removing and screwing in the valve
insert using the valve remover, turn the valve
remover by hand. Using a tool to turn the
valve remover could damage it.