Mitsubishi MOTORS OUTLANDER PHEV 2021, Руководство пользователя

Страница: 49 / 403

Normal charging (charging method with rated AC 220 V outlet)
3-12 Charging
3
E08301001479
1. Firmly apply the parking brake, press the
electrical parking switch to shift the “P”
position and put the operation mode of the
power switch in OFF.
2. Push the rear portion of the charging lid
(A) until it clicks, and open the charging
lid.
3. Press the tab (B) to open the inner lid (C).
4. Insert the charging cable plug into an out-
let.
Charging from rated AC 220 V
outlet WARNING
 It could cause electric leak, a fire or elec-
tric shock by entering water or dust into
the normal charge port.
 Do not touch the metal terminal of the
normal charge port (D) and the normal
charge connector.
Doing so could cause an electric shock
and/or malfunction.
NOTE
 There is a hole on the charge port for water
drainage. If this hole is blocked and water
gets trapped in the charge port, do not
charge. Please contact a MITSUBISHI
MOTORS Authorised Service Point.
 If the charge port is frozen, melt the ice using
a hair drier. Forcing the charge connector to
connect while frozen could result in mal-
function.
WARNING
 Make sure that the plug is inserted all the
way into the outlet before use. If charging
is continued in the state where it is not
fully inserted the plug, there is a possibil-
ity of generating abnormal heat and
resulting in a fire.
 To prevent an electric shock or fire due to
electric leak, perform charging using a
waterproofed outlet with earthing which is
connected to an earth leakage circuit
breaker.