Mitsubishi MOTORS OUTLANDER PHEV 2021, Руководство пользователя

Страница: 66 / 403

Charging troubleshooting guide
Charging 3-29
3
Normal charging is
discontinued. There is no power coming
from the outlet. There may have been a electrical power failure, or the breaker may have failed.Charging
will resume when the power source is reset.
The EV charging cable has
been disconnected. Check that the EV charging cable has not been disconnected.
The button on the normal
charge connector has been
pressed. If the charge connector button is pressed for a long period of time, charging will be
stopped. Start the charging procedure again.
The temperature of the drive
battery is too high or too low
to charge. Confirm the drive battery temperature.
Refer to “Cautions and actions to deal with intense heat” on page 2-11 and “Cautions
and actions to deal with intense cold” on page 2-12.
Charging is stopped by the
normal charge timer. Charging will stop depending on the timer function setting of the normal charge device.
Try it again with cancelling the timer settings.
The Charging timer was set
up by the MITSUBISHI
Remote Control or the Smart-
phone-link Display Audio
(SDA) after starting of nor-
mal charging. Cancel all the charging timer settings. Charging is automatically restarted if you cancel
the charging timer.
Refer to “MITSUBISHI Remote Control” on page 3-20.
For the Smartphone-link Display Audio (SDA), refer to the separate owner’s manual.
Quick charging can-
not be started. The charge connector is not
connected correctly and/or
not locked. Check that the charge connector is connected correctly and that it is locked.
The self-diagnostic function
of the quick charge device
returns a negative result. There is a possibility that the vehicle has a malfunction. Stop charging and contact a
MITSUBISHI MOTORS Authorised Service Point.
The power switch of the
quick charger is off. Check the power switch of the quick charger.
Consult an administrator or a maker of the quick charger.
Symptom Possible cause Possible solution