Mitsubishi MOTORS OUTLANDER PHEV 2021, Руководство пользователя

Страница: 54 / 403

Quick charging (charging method with quick charger)
Charging 3-17
3
2. Push the rear portion of the charging lid
(A) until it clicks, and open the charging
lid.
3. Press the tab (B) to open the inner lid (C).
4. Connect the quick charge connector in the
quick charge port to begin charging.
For connecting and disconnecting, follow
the instruction manual for each quick
charger.
WARNING
 Do not leave the inner lid open for a long
time.
It could cause electric leak, a fire or elec-
tric shock by entering water or dust into
the quick charge port.
C
B
D
 Do not touch the metal terminal of the
quick charge port (D) and the quick
charge connector.
Doing so could cause an electric shock
and/or malfunction.
CAUTION
 Be sure to insert the quick charge connector
straight into the quick charge port right up to
the base.
Failure to do so may result in the drive bat-
tery not charging or could cause damage to
the charging equipment.
 During quick charging, the quick charge con-
nector cannot be removed due to it is locked.
Do not touch or remove the quick charge
connector during charging. Doing so, the
quick charge connector might be damaged. If
you want to stop the quick charging on the
way, stop the charging according to the pro-
cedures of a quick charger, and remove the
quick charge connector after confirming the
charging is stopped.
WARNING NOTE
 There is a hole on the charge port for water
drainage. If this hole is blocked and water
gets trapped in the charge port, do not
charge. Contact a MITSUBISHI MOTORS
Authorised Service Point.

If the charge port is frozen, melt the ice using
a hair drier. Forcing the charge connector to
connect while frozen could result in mal-
function.