Mitsubishi MOTORS OUTLANDER PHEV 2021, Руководство пользователя

Страница: 78 / 403

Keyless operation system
Locking and unlocking 4-11
4
Operation can be confirmed as shown below.
However, the room lamp will only illuminate
if the front room lamp switch is in the
“DOOR” position or the rear room lamp
switch is in the middle (
 ) position.
E00305902493
In order to prevent vehicle theft or the accidental operation of the keyless operation system, the buzzer and the display on the information screen
in the multi-information display are used to alert the driver.
If a warning is activated, always check the vehicle and the keyless operation key. The warning is also displayed if there is a fault in the keyless
operation system.
 In order to make it possible to check that the
doors and tailgate are locked, you cannot
unlock them by using the tailgate open
switch for 3 seconds after locking them.

The following settings can be adjusted.
• The time within which locking confirma-
tion is possible
• The amount of time after unlocking until
the vehicle re-locks automatically
For further information, please consult a
MITSUBISHI MOTORS Authorised Service
Point.
On vehicles equipped with the Smartphone-
link Display Audio (SDA), screen operations
can be used to make the adjustment.
Refer to the separate owner’s manual for
details.
NOTE
Operation confirmation when locking
and unlocking
When locking: The turn-signal lamps blink
once and the outer buzzer
will sound once.
When unlocking: The room lamp illuminates
for approximately 15 sec-
onds, the turn-signal lamps
blink twice and the outer
buzzer will sound twice.
NOTE
 Functions can be modified as stated below.
For further information, please contact your
MITSUBISHI MOTORS Authorised Service
Point.
On vehicles equipped with the Smartphone-
link Display Audio (SDA), screen operations
can be used to make the adjustment.
Refer to the separate owner’s manual for
details.
• Set the confirmation function (blinking of
the turn-signal lamps) to operate only when
the vehicle is locked or only when the vehi-
cle is unlocked.
• Disable the operation confirmation function
(blinking of the turn-signal lamps) and
outer buzzer.
• Change the number of blinks for the opera-
tion confirmation function (blinks of the
turn-signal lamps).
Warning activation
Item Display Buzzer Note (Solution)
Detection of failure Inner buzzer sounds
once There is a fault in the keyless operation system.