Mitsubishi MOTORS OUTLANDER PHEV 2021, Руководство пользователя

Страница: 291 / 403

Reversing sensor system*
7-88 Starting and driving
7
E00615702354
To operate the system, move the selector
lever to the “R” position while the operation
mode is put in ON. When the reversing sen-
sor system is operated, the reversing sensor
system operation indicator lamp (A) will turn
on. To stop the operation, push the “SONAR”
switch; the reversing sensor system operation
indicator lamp (A) is goes off.
If there is an obstacle behind the vehicle, a
warning will be issued with the information
screen in the multi information display and a
warning buzzer.
Corner sensor
• Objects with a smooth surface, such as
glass.
• Objects that are low, such as kerbstones.
 If the bumper has been exposed to an impact,
the sensors may fail and prevent the system
from functioning properly. Have the vehicle
inspected at a MITSUBISHI MOTORS
Authorised Service Point.
NOTE
 The buzzer may sound lower than the normal
warning sound when the reversing sensor
system is receiving ultrasonic noise from
other sources, but this is not a malfunction.
The buzzer will stop sounding and the sys-
tem will return to normal operation after the
noise is no longer received.
CAUTION To operate
NOTE

Only when the select position is the “R”
position, the reversing sensor system can be
operated or be stopped by using the
“SONAR” switch.
Warning for obstacles
1- Corner sensor (left)
2- Back sensor
3- Corner sensor (right)
Vehicle to obstacle
distance
Warning dis-
play/sound cycle
Approx. 60 to 40 cm Intermittent
Approx. 40 to 30 cm Fast intermittent
Within approx. 30
cm
Continuous