Mitsubishi MOTORS OUTLANDER PHEV 2021, Руководство пользователя

Страница: 55 / 403

Quick charging (charging method with quick charger)
3-18 Charging
3
5. Make sure that the charging indicator (E)
on the instrument cluster is illuminated.
If the charging indicator is not illumi-
nated, charging is not started.
Follow the manual of each quick charger.
6. Charging is complete when the charging
indicator turns off.
Disconnect the quick charge connector
according to the manual of the quick
charger.
7. Close the inner lid and press the rear of
the charging lid until it clicks to close it.
NOTE
 When the quick charge connector is con-
nected to the charge port, the charging indi-
cator is blinking. When charging is started,
the charging indicator is illuminated.
 If you want to confirm the drive battery level
during charging, one of the doors is opened
or the multi information display switch is
operated, the drive battery level display (F)
appears on the information screen in the
multi information display.
Although the predicted charging time display
(G) appears, the charging time for the quick
charging is approximately 30 minutes and
displayed “--:--” in the screen and you can-
not confirm the remaining charging time.

Operation noise may be heard from the vehi-
cle body during quick charging.
This noise comes from operation of the drive
battery cooling system, and it is not a mal-
function.
 Since the drive battery cooling system uses
cool air of the air conditioning, the air condi-
tioning is automatically operated.
After quick charging, if the area under the
vehicle is wet, transparent and loose, it is
dehumidified water from the air conditioning
and not a malfunction.

When an electrical component is used during
charging, a charge time may become longer.
NOTE CAUTION
 As the quick charge connector is heavier in
comparison to the normal charge connector,
allowing it to drop could cause damage to the
vehicle or charge connector or personal
injury. When removing the connector, be
sure to pull it out straight and as carefully as
possible.

Do not leave that the quick charge connector
is connected to the quick charge port after
charging.
Doing so, someone might stumble it could
cause a injury or the quick charge port might
be damaged by playing it.
NOTE
 Although it is possible to start the Plug-in
Hybrid EV System if quick charging has not
finished normally, the charging indicator is
continuously blinking. In such a situation,
perform quick charging again and finish it
normally or contact a MITSUBISHI
MOTORS Authorised Service Point.