Mitsubishi MOTORS OUTLANDER PHEV 2021, Руководство пользователя

Страница: 264 / 403

Adaptive Cruise Control System (ACC)*
Starting and driving 7-61
7
You can cancel the ACC control by using
either of the methods below.
When the control is cancelled, the system is
placed in the ‘standby state’. You can make
the system restart the control by using the
“SET -” or “RES +” switch if the conditions
for activating the control are met.
 Press the “CANCEL” switch.
 Depress the brake pedal.
When the system shifts into the ‘standby
state’ as a result of cancellation of the ACC
control, the “SET” indicator goes out. At the
same time, the display of the following dis-
tance setting and running-ahead vehicle sym-
bol (only when the ACC is detecting a
vehicle) is placed in the standby state of dis-
play.
 The setting speed should be set up the suita-
ble speed according to a situation.
NOTE
 The set speed indication on the display turns
to “---” when the accelerator pedal is
depressed. This indication remains as long as
the pedal is in a depressed position.
 In certain conditions, the braking control and
alarming functions of the ACC may not work
for a short while after releasing the accelera-
tor pedal.
 Set speed adjustment is impossible while the
accelerator pedal is in a depressed position.
CAUTION
To terminate ACC control
To cancel of ACC control
NOTE
 You can also cancel the ACC control by
pressing the “ACC ON/OFF” switch. If this
switch is pressed, the ACC is turned off.