Mitsubishi MOTORS OUTLANDER PHEV 2021, Руководство пользователя

Страница: 242 / 403

Brake auto hold
Starting and driving 7-39
7
When the vehicle is stopped by depressing
the brake pedal with the select position in any
position other than “P” (PARK) or “R”
(REVERSE), the brake auto hold activates
and the vehicle will be held stationary.
The brake auto hold indicator lamp in the
instrument cluster will come on while the
system activates.
Depress the acceleration pedal with the select
position in any position other than “P”
(PARK) or “N” (NEUTRAL).
The brakes are released, and the brake auto
hold indicator lamp in the instrument cluster
will go off.
To activate brake auto hold
CAUTION
 Release the brake pedal after the brake auto
hold indicator lamp is illuminated.
NOTE
 In the following situations, the brake auto
hold system may not operate temporarily.
• The vehicle is stopped on a slippery road.
• The vehicle was stopped while the steering
wheel was turned all the way to the left or
right.
• The vehicle is being turned on a parking lot
turntable.
If this occurs, the brake auto hold system
will return to the normal operation if you
depress the accelerator pedal and the vehicle
starts moving again.

If the following operation is performed, the
brake auto hold will be deactivated and the
brake auto hold indicator lamp in the instru-
ment cluster goes off.
• When putting the select position to the “P”
(PARK) or “R” (REVERSE) position with
depressing the brake pedal.
• When the Electric parking brake is applied
by using the Electric parking brake switch.
 While the vehicle is held stationary with the
brake auto hold system, the Electric parking
brake will be automatically applied under the
following conditions, and a buzzer will
sound and the message will appear on the
information screen in the multi information
display.
• After approximately 10 minutes has elapsed
with applying the brake auto hold system.
• When the driver’s seat belt is unfastened.
• When the driver’s door is opened.
• When the operation mode of the power
switch is put in OFF.
NOTE
• When the system detects the vehicle sliding
down a slope.
If the Electric parking brake cannot be
applied automatically due to the system mal-
function, the message will appear on the
information screen in the multi information
display. Depress the brake pedal.
To start the vehicle
NOTE