Mitsubishi MOTORS OUTLANDER PHEV 2021, Руководство пользователя

Страница: 383 / 403

Fuses
11-20 Maintenance
11
*: Fusible link
 Some fuses may not be installed on your
vehicle, depending on the vehicle model
or specifications.
 The table above shows the main equip-
ment corresponding to each fuse.
The fuse block does not contain spare 7.5 A
or 30 A fuses. If one of these fuses burns out,
substitute with the following fuse.
7.5 A: 10 A spare fuse
30 A: 30 A audio system amp fuse
When using a substitute fuse, replace with a
fuse of the correct capacity as soon as possi-
ble.
E01008101389
E01007801884
1. Before replacing a fuse, always turn off
the electrical circuit concerned and put the
operation mode of the power switch in
OFF.
2. Remove the fuse puller (A) from the
inside of the main fuse block cover in the
engine compartment.
3. Referring to the fuse load capacity table,
check the fuse pertaining to the problem.
F2
Battery manage-
ment unit
7.5 A
F3
Drive battery
PTC heater
15 A
F4
Fuel tank filler
door
7.5 A
F5
Solenoid valve
(Air condition-
ing)
7.5 A
F6
Water pump
(Air condition-
ing)
7.5 A
F7
Electric motor
unit control
10 A
F8
Heated wind-
screen
7.5 A
F9
Power feeder
and charger con-
nector (12 V)
10 A
Drive battery
fan motor
15 A
F10 Ignition control 15 A
F11 Ignition control 7.5 A
No.
Sym-
bol
Electrical sys-
tem
Capaci
ty
Identification of fuse
Capacity Colour
7.5 A Brown
10 A Red
15 A Blue
20 A Yellow
30 A
Green (fuse type) /Pink (fusible
link type)
40 A Green (fusible link type)
Fuse replacement