Mitsubishi MOTORS OUTLANDER PHEV 2021, Руководство пользователя

Страница: 50 / 403

Normal charging (charging method with rated AC 220 V outlet)
Charging 3-13
3
5. Remove the cap (E) on the normal charge
connector (F) and make sure that there is
no foreign matter such as dust at the end
of the normal charge connector and the
normal charge port.
 To reduce the risk of electric shock or fire
due to electric leak, always use an earthed
outlet protected by a residual current
detector, rated for amperage equal to or
greater than the value specified by
MITSUBISHI MOTORS, and that is con-
nected to a dedicated branch circuit. If the
circuit is shared, and another electrical
device is being used at the same time as
the vehicle is charging, the circuit may
heat abnormally, the breaker may trip
and the circuit may cause adverse inter-
ference on the household electrical appli-
ances such as TVs and audio systems.
WARNING
 Never use an extension cable, multi-plug
adapter or conversion adapter. Using
them may cause abnormal overheating
resulting in fire.
 Do not use a multi type outlet to prevent
an electric shock or fire. There is no guar-
antee of safety because you cannot make
an earth connection in some multi type
outlet and it is not a dedicated type outlet.
 Use an outlet for EV charging which
waterproofing processing is carried out if
the installed position is outdoors or may
get wet by rain etc.
WARNING CAUTION
 Use the outlet that is installed approximately
1 meter above the ground. If the outlet posi-
tion is too low, the control box may touch the
ground, which may lead to troubles such as
submersion in water or getting trampled on.
F
E