Mitsubishi MOTORS OUTLANDER PHEV 2021, Руководство пользователя

Страница: 149 / 403

Multi information display
6-16 Instruments and controls
6
E00531201304
This displays the average fuel consumption
from the last reset to the present time.
There are two types of mode settings of man-
ual reset and automatic reset.
Refer to “Changing the reset mode for aver-
age fuel consumption” on page 6-19.
For information on how to change the aver-
age fuel consumption display setting, refer to
“Changing the function settings” on page
6-18.
If the preceding driving condition is in the
following situations, the EV cruising range
display may show less distance than before
even though there are almost the same level
remaining power in the drive battery.
• When much electricity is consumed from
the drive battery, such as in a traffic jam,
hill-climbing or high-speed driving.
• When the air conditioner is operating.
Treat the distance displayed as just a rough
guideline.
In addition, disconnecting the auxiliary bat-
tery cable will reset the EV cruising range
and the EV cruising range display may show
the different distance from the previous dis-
tance.
 The learned value for the EV cruising range
can be reset by operating the multi informa-
tion display switch.
If the EV cruising range display shows
extremely different distance, please reset the
learned value to the initialized value.
For details, refer to “Reset of EV/Total cruis-
ing range” on page 6-22.

When the drive battery is charged or the
vehicle is refueled, the cruising range display
is updated. However, if the charge level is
low or the refueling amount is small, it can-
not be updated correctly. Fully charge the
battery or refill to full tank whenever possi-
ble.
NOTE
 On rare occasions, the value displayed for
the driving range may change if you are
parked on an extremely steep incline. This is
due to the movement of fuel in the tank and
does not indicate any malfunction.

The display setting can be changed to the
preferred units (km or miles).
Refer to “Changing the function settings” on
page 6-18.
 When the EV cruising range falls below
approximately 1 km (1 mile), the EV cruis-
ing range display shows “---”.

When the total cruising range falls below
approximately 50 km (30 miles), the total
cruising range display shows “---”.
Average fuel consumption dis-
play
NOTE
NOTE
 The average fuel consumption display can be
reset separately for the auto reset mode and
for the manual reset mode.
 “---” is displayed when the average fuel con-
sumption cannot be measured.
 The initial (default) setting is “Auto reset
mode”.
 The average fuel consumption will depend
on the driving conditions (road conditions,
how you drive, etc.). The displayed fuel con-
sumption may vary from the actual fuel con-
sumption. Treat the fuel consumption
displayed as just a rough guideline.
 The memory of the auto reset mode or man-
ual reset mode for the average fuel consump-
tion display is erased if the auxiliary battery
is disconnected.
 The display setting can be changed to the
preferred units {km/L, mpg (US), mpg (UK)
or L/100 km}.
Refer to “Changing the function settings” on
page 6-18.