Mitsubishi MOTORS OUTLANDER PHEV 2021, Руководство пользователя

Страница: 263 / 403

Adaptive Cruise Control System (ACC)*
7-60 Starting and driving
7
The set speed decreases by 1 km/h every time
you push down the “SET -” switch while the
ACC control is working. If you hold the
switch pushed down, the set speed decreases
in increments of 5 km/h.
If you depress the brake pedal while the ACC
control is working, the control is cancelled,
allowing you to decelerate the vehicle.
At the point where the vehicle slows down to
your desired speed, push down the “SET -”
switch; the new speed is then set in the sys-
tem.
Simply depress the accelerator pedal to tem-
porarily accelerate the vehicle. Releasing the
pedal automatically slows down the vehicle
to the set speed and the ACC restarts its con-
trol.
By using the “SET -” switch:
CAUTION
 The setting speed should be set up the suita-
ble speed according to a situation.
NOTE
 There is some time lag between the setting to
a new speed and actually decelerating to that
speed.
 If there is a vehicle in front and your vehicle
is following that vehicle at a speed lower
than the set speed, the set speed alone
decreases with no actual deceleration taking
place.

When the switch is held pushed, a buzzer
sounds every time the set speed changes.
By using the brake pedal:
NOTE NOTE
 The ACC control is cancelled if you depress
the brake pedal and the ACC control does
not resume even when you release the pedal.
To temporarily accelerate the vehi-
cle
CAUTION
 The ACC braking control and proximity
alarm functions will not work while the
accelerator pedal is depressed.