Mitsubishi MOTORS OUTLANDER PHEV 2021, Руководство пользователя

Страница: 189 / 403

Combination headlamps and dipper switch
6-56 Instruments and controls
6 E00506101631
If the driver’s door is opened when the opera-
tion mode of the power switch is put in ACC
or OFF with the lamps illuminated, a buzzer
will sound to remind the driver to turn off the
lamps.
The buzzer will automatically stop if the
auto-cutoff function is activated, the lamp
switch is turned off, or the door is closed.
E00530601226
The daytime running lamps come on when
the operation mode is ON and the lamp
switch is in the “OFF” or “AUTO” position
and the tail lamps are off.
E00506201964
When the lamp switch is in the “ ” posi-
tion, the beam changes from high to low (or
low to high) each time the lever is pulled
fully (1). While the high beam is on, the high
beam indicator lamp in the instrument cluster
will also illuminate.
E00506301587
The high beams flash when the lever is pulled
slightly (2), and will go off when it is
released.
When the high beam is on, the high beam
indicator lamp in the instrument cluster will
illuminate.
NOTE
 If the warning lamp illuminates, there may
be a fault on the unit. Have the vehicle
checked at a MITSUBISHI MOTORS
Authorised Service Point.
Lamp monitor buzzer
Daytime running lamps
NOTE
 If the lamp switch is in the “ ” or “ ”
position, or if the tail lamps are on when the
lamp switch is in the “AUTO” position, the
daytime running lamps come on as position
lamps.
Dipper (High/Low beam
change)
Headlamp flasher
NOTE
 The high beams can also flash when the lamp
switch is OFF.
 If you turn the lamps off with the headlamps
set to highbeam, the headlamps are automati-
cally returned to their low-beam setting
when the lamp switch is next turned to the
“
” position.