Mitsubishi MOTORS OUTLANDER PHEV 2021, Руководство пользователя

Страница: 136 / 403

Instruments
Instruments and controls 6-3
6
Indicates the charging power generated by the
regenerative brake.
The more the needle moves, the more electric
energy is charged.
The needle of the energy usage indicator may
not enter the charge zone when the drive bat-
tery is close to full charge.
Also, if the needle of the energy usage indica-
tor indicates the engine output zone, the nee-
dle will not indicate the charge zone even
when the drive battery is charged with regen-
erative brake.
Indicates the instantaneous engine output
(kW).
E00531301581
Each time you press the rheostat illumination
button, there is a sound and the brightness of
the instruments changes.
NOTE
 Depending on the state of the vehicle (such
as during heating of air conditioner), the
engine may start even if the needle of the
energy usage indicator is indicated before the
zone 2 (zone that the engine starts in high
possibility).
 Even when the EV priority mode is selected
and the engine does not start, the needle of
the energy usage indicator may indicate the
zone 2 (zone that the engine starts in high
possibility).
 While the EV priority mode is selected, even
if the needle of the energy usage indicator
enters the zone 2, the engine will not start
unless over the specified point by pressing
the accelerator pedal.

Depending on the vehicle condition, the
movement of the needle of the energy usage
indicator may be different or fluctuated.
 Economical driving can be done by operat-
ing in a state that the swing of the needle is
small within the zone 1.
Charge zone
NOTE
 You can check the charging power generated
by regenerative brake with the charging
power gauge in the multi information display
even while the engine is running.
 The charging power generated by regenera-
tive brake is indicated by both the charge
zone in the energy usage indicator and the
charging power gauge in the multi informa-
tion display.
Engine output zone
Meter illumination control
1- Brightness level
2- Rheostat illumination button
NOTE
 You can adjust to eight different levels
respectively for when the position lamps are
illuminated and when they are not.

When the lamp switch is in a position other
than the “OFF” position, the meter illumina-
tion switches automatically to the adjusted
brightness, depending on the brightness out-
side the vehicle.
 The brightness level of the instruments is
stored when the operation mode of the power
switch is put in OFF.