Mitsubishi MOTORS OUTLANDER PHEV 2021, Руководство пользователя

Страница: 274 / 403

Forward Collision Mitigation System (FCM)*
Starting and driving 7-71
7
E00635601701
This switch is used to turn on and off the
FCM and UMS and also to select your
desired collision alarm timing.
When the switch is held pressed, the ON/OFF
state of the FCM and UMS changes from ON
to OFF and vice versa. If you give the switch
a short press with the FCM in the ON state,
you can change the collision alarm timing.
You can switch the system from OFF to ON
or ON to OFF if you hold the FCM and UMS
ON/OFF switch pressed when the operation
mode is set to “ON”.
Once the system is turned on, the information
screen of the multi-information display shows
the collision alarm timing currently selected,
and the
indicator on the instrument cluster
goes out.
When you turn off the system, the following
message appears on the screen and the
indicator comes on.
Cycling the operation mode to ON will set
the FCM back ON.
Give a short press to the FCM and UMS
ON/OFF switch to change the timing at
which the frontal collision alarm is triggered.
Every time you press the switch, the alarm
timing changes from three levels, “FAR”
(earlier alarming), “MIDDLE” (normally
alarming) or “NEAR” (later alarming).
As you make selection, the selected alarm
timing is displayed on the information screen
of the multi-information display. Even after
turning off the FCM or setting the operation
mode to “OFF”, the system retains your last
selected alarm timing in memory.
When “FAR” is selected
FCM and UMS ON/OFF switch
NOTE

When the FCM and UMS ON/OFF switch is
held pressed to change the ON/OFF state of
the FCM, the ON/OFF state of the UMS is
also changed at the same time.
To turn on/off the system
NOTE

The indicator is combined with the
“UMS OFF” indicator.
To change alarm timing