Mitsubishi MOTORS OUTLANDER PHEV 2021, Руководство пользователя

Страница: 219 / 403

Starting and stopping the Plug-in Hybrid EV System
7-16 Starting and driving
7
E00632901237
Insert the keyless operation key into the key
slot. Starting the Plug-in Hybrid EV System
and changing the operation mode should be
now possible.
Remove the keyless operation key from the
key slot after starting the Plug-in Hybrid EV
System or changing the operation mode.
E00633001264
If the operation mode is in OFF and the
driver’s door is opened with the keyless oper-
ation key in the key slot, the warning display
will appear and the outer buzzer sounds for
approximately 3 seconds to remind you to
remove the key.
 If you press the power switch when the
selector lever position is other than “P” posi-
tion while your vehicle is stopped, the selec-
tor lever position automatically shifts to “P”
position, Plug-in Hybrid EV System stops,
and the power mode turns to “OFF”.
 If the parking lock mechanism is faulty, a
warning is displayed on the information
screen in the multi-information display.
When this warning is displayed, Plug-in
Hybrid EV System cannot be stopped unless
you apply the parking brake and then press
the power switch. Park on a flat place with
the parking brake securely applied. Have
your vehicle inspected by a MITSUBISHI
MOTORS Authorised Service Point.
NOTE If the keyless operation key is
not operating properly
NOTE
 Do not insert into the key slot anything other
than the keyless operation key. This could
cause damage or a malfunction.
 Remove the object or additional key from the
keyless operation key before inserting the
key into the key slot. The vehicle may not be
able to receive the registered ID code from
the registered key. Therefore, the Plug-in
Hybrid EV System may not start and the
operation mode may not change.

The keyless operation key is fixed in the key
slot when inserted in the illustrated direction.
Simply pull out the key to remove it from the
key slot.
Keyless operation key reminder
NOTE