Charging troubleshooting guide
Charging
3-27
3
E08301501357
Charging troubleshooting guide
Symptom
Possible cause
Possible solution
Charging cannot be
started.
The operation mode of the
power switch in ON
Put the operation mode of the power switch in “OFF” before charging.
The drive battery is already
fully charged.
Charging cannot be performed if the drive battery is already fully charged. Charging
automatically turns off if the drive battery is fully charged.
The temperature of the drive
battery is too high or too low
to charge.
Confirm the drive battery temperature.Refer to “Cautions and actions to deal with
intense heat” on page 2-11 and “Cautions and actions to deal with intense cold” on page
2-12.
The auxiliary battery is dis-
charged.
The drive battery cannot be charged if the vehicle electrical systems cannot be turned on.
If the auxiliary battery is discharged, charge or emergency start the auxiliary battery.
Refer to “Emergency starting” on page 9-2.
The vehicle or the charging
cable has a malfunction.
The vehicle or charging cable may have a malfunction. Confirm if the warning lamp on
the meter is illuminated. Confirm if the indicator on the control box is indicating a mal-
function. If a warning is displayed, stop charging and contact a MITSUBISHI MOTORS
Authorised Service Point.
Содержание OUTLANDER PHEV 2021
