Mitsubishi Electric GT15, Руководство по подключению

Страница: 606 / 864

16 - 42
16. SERVO AMPLIFIER CONNECTION
16.6 Device Range that Can Be Set
(9) MELSERVO-J4-*A, JE-*A
*1 Use 1 to 80 of PA, PB, PC, PD, PE, PF and PL when the
GOT writes data to RAM of the servo amplifier.
Use 1001 to 1080 of PA, PB, PC, PD, PE, PF and PL when
the GOT write data to E
2
PROM of the servo amplifier.
Use PA, PB, PC, PD, PE, PF, PL 1001 to 1080 when reading
parameters to the servo amplifier RAM.
*2 The GOT cannot read or write data from/to consecutive
devices.
*3 Only reading is possible.
*4 Only reading is possible for DI0 to DI1.
*5 Only writing is possible.
POINT POINT POINT
Precautions for SP, OM, TMB, TMI, TMO, and TMD
devices
(1) For bit devices
Only writing is possible.
[Alternate] of a bit switch cannot be used.
Use [Set], [Reset], and [Momentary] of a bit
switch.
(2) For word devices, double word devices
Only writing is possible.
Numerical input cannot be used.
When writing, use [Word Set] of a data set switch.
The following shows correspondences between virtual
devices for servo amplifier and data of the servo
amplifier used with the GOT.
(a) Servo amplifier request
(b) Operation mode selection
(c) Instruction demand (for test operation)
Device name
*2
Setting range
Device
No.
represen
tation
B
it device
Servo amplifier request (SP) SP0 to SP6
Decimal
Operation mode selection
(OM) OM0 to OM2
OM4
Instruction demand
(for test operation) (TMB)
TMB1 to TMB6
One-touch tuning command
(OTI)
*5
OTI0 to OTI5
Wo
rd
d
e
vi
ce
Basic setting parameter
(PA)
*1
PA1 to PA32
PA1001 to PA1032
Gain
filter parameter
(PB)
*1
PB1 to PB64
PB1001 to PB1064
Extension setting
parameter (PC)
*1
PC1 to PC80
PC1001 to PC1080
I/O setting parameter
(PD)
*1
PD1 to PD48
PD1001 to PD1048
Extension setting 2
parameter (PE)
*1
PE1 to PE64
PE1001 to PE1064
Extension setting 3
parameter (PF)
*1
PF1 to PF48
PF1001 to PF1048
Linear servo motor/DD motor
setting parameter (PL)
*2
PL1 to PL48
PL1001 to PL1048
Status display (ST)
*3
ST0 to ST41
Alarm (AL)
*3
AL0 to AL1
AL11 to AL25
AL200 to AL205
AL210 to AL215
AL230 to AL235
Alarm (ALM)
*3
ALM0 to ALM1
ALM11 to ALM52
ALM200 to ALM215
ALM220 to ALM235
ALM240 to ALM255
Machine diagnosis data
(MD)
*3
MD0 to MD11
One-touch tuning data
(OTS)
*3
OTS0 to OTS3
External input (DI)
*4
DI0 to DI2
External output (DO)
*3
DO0 to DO1
Lifetime diagnosis (ALD)
*3
ALD0 to ALD1
Doub
le word device
Input signal for test operation
(for test operation) (TM0)
TMI0
Forced output of signal pin
(for test operation) (TMO)
TMO0
Set data
(for test operation) (TMD) TMD0 to TMD1
TMD3
Device
name
Item Symbol
SP0 Status display data clear ―
SP1 Current alarm clear ―
SP2 Alarm history clear ―
SP3 External input signal prohibited ―
SP4 External output signal prohibited ―
SP5 External input signal resumed ―
SP6 External output signal resumed ―
Device
name
Item Symbol
OM0 Normal mode (not test operation mode) ―
OM1 JOG operation ―
OM2 Positioning operation ―
OM4 Output signal (DO) forced output ―
Device
name
Item Symbol
TMB1 Temporary stop command ―
TMB2
Test operation (positioning operation) start
command
―
TMB3 Forward rotation direction ―
TMB4 Reverse rotation direction ―
TMB5 Restart for remaining distance ―
TMB6 Remaining distance clear ―