Mitsubishi Electric GT15, Руководство по подключению

Страница: 737 / 864

22. MULTI-CHANNEL FUNCTION
22.3 GOT Side Settings
22 - 23
17
ROBOT CONT
ROLLER
CONN
E
C
T
ION
18
CNC CONNECTION
19
ENER
GY M
EASU
RIN
G
UNIT/ELEC
TRIC M
UL
TI
-
MEA
S
UR
IN
G IN
STRUM
EN
T
CON
NEC
TION
20
GOT
MUL
T
I-
DROP
CONNECTION
21
M
U
LT
IP
LE
-G
T1
4,
GT
12
,
GT
11
, G
T10
CO
NNEC
TIO
N FUNCTION
22
MUL
T
I-CHANNE
L
FUNC
TION
23
F
A
TRANSP
A
R
ENT
FUNCT
ION
22.3.4 Determining the GOT side interface (Interface selection)
To use the multi-channel function, add interfaces to the GOT with the following methods if required.
(1) GT16
• Install communication units on the extension interfaces.
• Use communication units installed on the extension interfaces with the RS-232 interface, the RS422/485
interface, and/or the Ethernet interface built in the GOT.
3rd stage
Extension interface 1
Extension interface 2
Standard interface 1
(RS-232 interface built in the GOT)
Allows a controller to be connected via the serial
communication.
For RS-232 communications, connect RS-232 cable.
For RS-422 communications, attach an RS-422
conversion unit and connect RS-422 cable to it.
(For the GT1655, the RS-422 conversion unit is not applicable.)
Extension interface allows the installation
of a communication unit up to the 3rd stage,
respectively.
(For the GT1655, only one extension interface can
be installed.)
2nd stage
1st stage
Standard interface 2
(USB interface built in the GOT)
Not used for the multi-channel function.
Standard interface 4
(Ethernet interface built in the GOT)
Allows controllers to be connected via Ethernet.
Up to four channels can be set.
Standard interface 3
(RS-422/485 interface built in the GOT)
Allows a controller to be connected via the serial
communication.
(Example: In the case of the GT1685)