Mitsubishi Electric GT15, Руководство по подключению

Страница: 412 / 864

11 - 18
11. CC-Link IE CONTROLLER NETWORK CONNECTION
11.4 PLC Side Setting
(c) Routing setting
Up to 64 [Target Network No.]s can be set.
However, the same transfer network number
cannot be set twice or more (multiple times).
Therefore, the one that can access to other station
from the request source host GOT is 64 kinds of
[Target Network No.]s.
POINT POINT POINT
Routing parameter setting of request source
Routing parameter setting is also necessary for the
request source GOT.
For the setting, refer to the following.
11.3.3 Routing parameter setting
(2) [Controller Setting] of GT Designer3
POINT POINT POINT
Network type of the GOT side
When the network is in the extended mode, be sure to
set the network type of the GOT side to [CC IE Control
extended mode].
For [Controller Setting], of GT Designer3, refer to the
following.
11.3.1 Setting communication interface
(Communication settings)
Item Range
Target Network No. 1 to 239
Relay Network No. 1 to 239
Relay Station No. 1 to 120
Item Set value
Network type CC IE Control extended mode
Network No. 1: Network No.1
Station No. 2: Station No.2
Group No. 0 (fixed)
Mode Online (auto. reconnection)
Refresh Interval 1ms (Use default value)
Retry 3times (Use default value)
Timeout Time 3sec (Use default value)
Delay Time 0ms (Use default value)
Monitor Speed High (Normal) (Use default value)